Unique features
-
Extremely strong and impact resistant
-
Extremely high printing precision
-
High gloss
-
Good chemical resistance
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 106% |
| Print temp: ± 245 – 275° C * | Print speed: Medium | Retraction: Yes ± 5mm |
| Heat bed: ± 100 – 120° C * | Fan speed: 0-30% | Experience level: Expert |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*) Because of the relative high percentage of added PolyCarbonate, ABSpro has a tendency to warp and therefore it is recommended to use a temperature-controlled build chamber and to prepare your heat bed with DimaFix fixative spray when 3D printing large(r) scaled objects with ABSpro.
Filament length
| ρ: 1.05 g/cc | 50 gr coil | 0.5 Kg spool | |||
| Ø 1.75mm | ± 19.8m | ± 198m | |||
| Ø 2.85mm | ± 7.5m | ± 75m |
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
-
RoHS directive 2011/65/EC
-
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Recensioner
Clear filtersDet finns inga recensioner än.