Printing Recommendations:
Nozzle temperature: 200–240°C
Heated bed: Recommended 0-80°C
Print speed: 10–30 mm/s
Build platform: Glass bed, Kaptontape, Blue tape. Recommended: Glass bed + Dimafix
Flexible Filament Red 1.75mm. The hardness of TPU Filament is 85A Shore. Flex Filament is made in Slovenia and is manufactured in 300g coils. The wear resistance of the TPU Filament is 20% better than the ABS Filament and 68% better than the PLA Filament.
Recommended Print Speed:
Upper and lower layer: 10-20 mm / sec (600-1200 mm / min)
Print speed: 15-35 mm / sec (900-2100 mm / min)
WARNING: If you have trouble printing with flexible filaments, you may hear the filament cross during printing, which means that the filament is damp and needs to be dried for good results.
Recensioner
Det finns inga recensioner än.