Key features
-
Translucent ABS filament
-
-
90% light transmittance with 2.2% haze
-
-
UL 94 HB flammability rating
-
Good chemical resistance
-
Limited warping and styrene smell when being 3D printed
-
Compatible with Helios Support for complex multi-extrusion 3D printing
-
Post-processing with acetone, tetrahydrofuran (THF) and other analogous solvents
Applications
-
Household tools
-
Electronic goods
-
Frames and panels
-
Custom components
-
Short-run manufacturing
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Experience level: Beginner |
| Print temp: ± 220 – 260° C | Fan speed: 0-30% | |
| Heat bed: ± 90 – 100° C | Enclosure needed: Recommended |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 106 g/cc | 50 gr coil | 0.75 Kg spool | 2.3 Kg spool | 4.5 Kg spool | 8 Kg spool |
| Ø 1.75mm | ± 19.6m | ± 294m | ± 902m | ± 1765m | ± 3138m |
| Ø 2.85mm | ± 7.4m | ± 111m | ± 340m | ± 665m | ± 1183m |
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below-listed directives and regulations.
-
RoHS directive 2011/65/EC
-
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
Recensioner
Clear filtersDet finns inga recensioner än.