The product is modified based on PLA material, in addition it has gorgeous luminous rainbow appearance effect.PLA is an environmentally friendly material and easy to print.
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | PLA |
| Density(g/cm3) | 1.2 |
| Heat Distortion Temp(℃,0.45MPa) | 53 |
| Melt Flow Index(g/10min) | 3.5（190℃/2.16kg） |
| Tensile Strength(MPa) | 72 |
| Elongation at Break(%) | 11.8 |
| Flexural Strength(MPa) | 90 |
| Flexural Modulus(MPa) | 1915 |
| IZOD Impact Strength(kJ/㎡) | 5.4 |
| Durability | 4/10 |
| Printability | 9/10 |
|
Recommended printing parameters |
|
| Extruder Temperature(℃) | 210-230℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, glass board, carbon fiber board, PEI |
| Feature | |
| Flexible | —— |
| Elastic | —— |
| Impact Resistant | —— |
| Soft | —— |
| Composite | —— |
| UV Resistant | —— |
| Water Resistant | —— |
| Dissolvable | —— |
| Heat Resistant | —— |
| Chemically Resistant | —— |
| Fatigue Resistant | —— |
| Need drying | —— |
| Heated Bed Required | —— |
| Print recommend | —— |
1.Luminous PLA is easy to grind nozzle and extruder gear, it is recommended to use steel nozzle or ruby nozzle, hardened steel extruder gear will be perfect , if the nozzle is clogging , replace the throat and nozzle.
2. The luminous effect is related to the intensity and time of light source. The longer the irradiation time, the better the luminous effect.
