Extremely transparent and high gloss
90% optical light transmittance with only 1% of haze
Easy to print
Nearly warp-free and perfect inter-layer adhesion
Good first layer adhesion to a heated glass print bed and many other surfaces
Compatible for printing at high speed
High strength and toughness compared to similar materials
General printing guidelines *
|Nozzle size: ≥ 0.15mm||Layer height: ≥ 0.1mm||Flow rate: ± 110%|
|Print temp: ± 220 – 260° C||Print speed: High||Retraction: Yes ± 6mm|
|Heat bed: ± 60 – 80° C||Fan speed: 30-100%||Experience level: Beginner|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
HDglass color terminology
HDglass comes in a variety of colors ranging from extremely clear to completely opaque. Please see below table with explanation about the color terminology used for our HDglass filaments.
|Transparent / Clear||Translucent colored||Slightly translucent colored||Opaque|
|ρ: 1.27 g/cc||50 gr coil||0.75 Kg spool||2.3 Kg spool||4.5 Kg spool||8 Kg spool|
|Ø 1.75mm||± 16.4m||± 246m||± 753m||± 1473m||± 2619m|
|Ø 2.85mm||± 6.2m||± 93m||± 284m||± 555m||± 987m|
Product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant to below listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Det finns inga recensioner än.