Unique features
-
Extremely lightweight
-
-
Material density of 0.75 g/cc
-
-
20% lighter than average PP
-
40% lighter than average PLA
-
-
-
Good wear-, abrasion-, and fatigue resistance
-
High chemical resistance
-
Does not absorb moisture
-
Excellent interlayer adhesion
-
Excellent adhesion to Eurocel LDPE Tape (PE 920)
General printing guidelines *
| Nozzle size: ≥ 0.4mm | Layer height: ≥ 0.1mm | Flow rate: ± 104% |
| Print temp: ± 215 – 245° C | Print speed: Medium / High | Retraction: Yes ± 5mm |
| Heat bed: ± 0 – 100° C * | Fan speed: 50-100% | Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*) Large Pegasus PP Ultralight prints can be printed on an unheated 2mm or 3mm PP plate, which can be attached to the print bed. Smaller prints can be printed on standard PP packaging tape.
Filament length
| ρ: 0.75 g/cc | 50 gr coil | 0.5 Kg spool | |||
| Ø 1.75mm | ± 27.7m | ± 277m | |||
| Ø 2.85mm | ± 10.5m | ± 105m |
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
-
RoHS directive 2011/65/EC
-
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Recensioner
Det finns inga produktrecensioner än.