PolyMaker Fiberon PETG-ESD Black 1,75mm , 500g
539,00 kr
Slut i lager
Få notis när produkten finns i lager
Fiberon™ PETG-ESD pairs electrostatic dissipation (ESD) with an improved toughness PETG. Fiberon™ PETG-ESD is compounded with carbon nanotubes that allow it to dissipate electrostatic charges thanks to its very low surface resistivity. This innate property offers protection to delicate electronics during the electronic assembly processes or when used for printed electronic housings.
Fiberon™ PETG-ESD offers electrostatic discharge (ESD) safety with improved toughness making it a good candidate for applications in electronics industry.
NOTE: ™ PETG-ESD is compounded with carbon nano-tubes:
Here is a research regarding ABS compounded with carbon nano-tubes.
Download the TDS to learn more about the performance of the material.
Density: 1.24g/cm³
Spool dimensions:
0.5kg cardboard spool:
Spool Inner Hole Diameter: 55±1mm
Spool Diameter: 200±1mm
Spool Width: 65.6±2mm
Spool Weight: 190±7g
Printing Temperature: 250˚C – 290˚C
Bed Temperature: 70˚C – 80˚C
Printing Speed: up to 500mm.s
Fan: OFF
Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Drying Settings: 65˚C for 3h
(Only if the material has absorbed moisture)
Printer Profiles:
| Tillverkare | Polymaker |
|---|---|
| Diameter | 1,75mm |
| Vikt | 500 gram |
| Färg | Svart |
Du måste vara inloggad för att skriva en recension.
Leverans
- Vi levererar din order så snart vi kan, normalt senast dagen efter orderläggning.
- Vi skickar varor med lämplig speditör beroende på destination och paketstorlek
- Normal leveranstid inom sverige är 1-3 vardagar.
Har du speciella önskemål om din leverans är du välkommen att kontakta oss så försöker vi lösa detta på bästa sätt.
Recensioner
Clear filtersDet finns inga recensioner än.