En byggyta av pulverlacket fjäderstål ger dina prints en snygg yta med textur från pulverlacken. Hjälper till att dölja första lagrets linjer.
Passar bland annat till:
Creality CR-10 & CR-10S, Hictop CR-10, Hictop Hero D3, JG Aurora A5 & A5X, Artillery Sidewinder X1, Tevo Black Widow, Folger Tech FT-5, Creative3D Elf CoreXY, SainSmart Coreception CoreXY, BIQU Thunder, ADIMLab Gantry, Wanhao D9 300, Sunlu S8
Wham Bam förklarar:
We start with our original high chromium spring steel Flexi Plates, powder paint them with PEI, and bake them in a kiln. The PEI Powder Painted Flexi Sheets have a pronounced texture and give the bottom of your part a fantastic finish! The plates are coated on both sides, so you can save one side for pristine parts while you abuse the other side. Works perfectly with your Wham Bam magnetic base, not included. The Flexi Plate is 0.6mm thick.
It behaves as most PEI sheets would and works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use purple glue sticks or Magigoo, they will wash off with water after use.
To clean, use some isopropyl alcohol after each use to keep contaminants away. If you ever need to restore adhesion, use very fine sandpaper 600 or higher and pass lightly, then clean with alcohol. For PLA and PETG we recommend 70° C bed temperature.